Back
To Entire
"Interface" List
|
Firewire Audiophile |
|
$267.00
Win
/ Mac
Retail List $349.95
You Save $ 82.95!
Review
Cart
|
How
to Order by phone, fax or mail |

FIREWIRE AUDIOPHILE
Audio and MIDI Interface with
S/PDIF
|
by
M-Audio |
|


(click
to enlarge FRONT and REAR View)
|
|
FireWire Audiophile
is a compact, FireWire-compatible audio/MIDI interface that takes the legacy of M-Audio’s award-winning Audiophile line to the next level.
Perfect for live performance, home recording, and digital DJ work.
Stereo headphone output with A/B switching between assignable sources allows
pre-cuing for DJs and mobile musicians—and the assignable aux bus is perfect for creating dedicated headphone mixes and effect sends. You also get zero-latency hardware direct monitoring, ultra-low latency ASIO software direct monitoring, and 1 x 1 MIDI I/O. FireWire Audiophile even has AC-3 and DTS passthrough for surround sound playback.
|
|
Feature
Highlights...
- Simple Firewire connectivity for audio and MIDI
- Stereo analog line-level audio inputs ( RCA)
- Two pairs of stereo analog line-level audio outputs
(RCA) with level control knob
- Digital S/PDIF in and out (coaxial)
- Digital out also supports AC-3/DTS surround sound
- MIDI in and out
- Headphone output (1/4") with level
control knobs
- Software-controlled mixing of hardware and software I/O
- Aux sends on all channels and aux output assign allows for dedicated headphone mixes and sends to external effects
- Frequency response: 20Hz-40kHz +/-0.40dB, 96kHz sample rate
- Dynamic range: 108dB A-weighted
- Signal-to-noise: 106dB A-weighted
- Low latency ASIO software direct monitoring
- Powered via 6-pin
FireWire bus or included DC power supply
- Compatibility:
ASIO 2
MME
Sound Manager
DirectX
Mac OS X Core Audio / Core MIDI
System Requirements
Windows:
- Pentium III 500 MHz or higher; 128 MB RAM
- Windows 2000 (SP3)/Windows XP (SP1)
- DirectX 8.1 or higher
- 6-pin FireWire port or adapter
System Requirements Mac:
- Macintosh G3* 500 MHz or higher
- w/ OS 9.2.2, 128 MB RAM; G4* 500MHz
- w/ OS 10.1.5 or OS 10.2.6 or greater,256 MB RAM (OSX)
* G3/G4 accelerator cards not supported; native FireWire ports
are required
|
NOTE:
The Audiophile Firewire is equipped for direct connection to Line Level
instruments such as electronic keyboards and MIDI sound modules. An
optional preamp is required for recording with a microphone,
or any other non-Line Level equipment.
An
excellent preamp is the AudioBuddy !
more info |
|
|
|